Manufacturing should be considered from all sides!

The development of the tool manufacturing industry in China is rapid, except because of the large demand for plastic molds in the market, and the requirements of this era. Mold manufacturing industry is so much in the limelight, so for

Mold common problems and how to deal with them!

Now in our mold processing industry, there are a variety of die-casting mold surface treatment new technologies continue to emerge, but we can be roughly divided into the following three categories: (1) the traditional heat treatment process improvement technology; (2) coating technology, including chemical plating, etc..　　(3) surface modification technology, including surface heat expansion infiltration treatment, surface phase change strengthening, electric fire

What are the plastic mold parts included

Plastic mold parts: various non-standard ejector pins, cylinders, cores, inserts, mold kernel, positioning beads, date stamp, clamping clips, limit clips, secondary ejector, reset mechanism, mold counter, auxiliary device, positioning parts, cooling parts, steel ball sleeve, guide pillar guide sleeve, inclined top device, air top, etc.

Molds can be classified according to different pouring systems?

We will use many methods when casting plastic molds, according to the different types of casting system can be divided into the following three categories. 　　(1) Hot runner molds: the structure of such molds is roughly the same as fine spout, the biggest difference is that the runner is in one or more hot runner plates with constant temperature and hot spout, there is no cold material demoulding, the runner and spout are directly on the product, so the runner does not need to be demoulded, this system is also called no spout system, it can save raw material, it is suitable for the case of expensive raw material and high product requirements, the design and processing is difficult, the mold Higher cost. 　　(1) 热流道模具：此类模具结构与细水口大体相同，其最大区别是流道处于一个或多个有恒温的热流道板及热唧嘴里，无冷料脱模，流道及浇口直接在产品上，所以流道不需要脱模，此系统又称为无水口系统，可节省原材料，适用于原材料较贵、制品要求较高的情况，设计及加工困难，模具成本较高。

The specific steps of injection mold processing design are introduced!

I. Acceptance of assignment letter　　 (1) Regularly approved drawings of the manufactured parts, with the grade and transparency of the materials used, etc.　　 (2) Instructions or technical requirements for the manufactured parts.　　 (3) Production output.　 (4) Sample of the part.　　 Usually the mold design task letter by the plastic parts technician according to the molding plastic

Mold common problems and how to deal with them!

Now in our mold processing industry, there are a variety of die-casting mold surface treatment new technologies continue to emerge, but we can be roughly divided into the following three categories.　　 (1)Improvement technology of traditional heat treatment process;　　 (2) coating technology, including chemical plating, etc.　　 (3) surface modification technology, including surface heat expansion infiltration treatment, surface phase change strengthening, electric fire